Horje

Java - File I/O
Start
  Migrating from java.io.File to Java 7 NIO (java.nio.file.Path)

These examples assume that you already know what Java 7's NIO is in general, and you are used to writing code using java.io.File. Use these examples as a means to quickly find more NIO-centric documentation for migrating.

There is much more to Java 7's NIO such as memory-mapped files (opens new window) or opening a ZIP or JAR file using FileSystem (opens new window). These examples will only cover a limited number of basic use cases.

As a basic rule, if you are used to perform a file system read/write operation using a java.io.File (opens new window) instance method, you will find it as a static method within java.nio.file.Files (opens new window).

Point to a path

// -> IO
File file = new File("io.txt");

// -> NIO
Path path = Paths.get("nio.txt");

Paths relative to another path

// Forward slashes can be used in place of backslashes even on a Windows operating system
// -> IO
File folder = new File("C:/");
File fileInFolder = new File(folder, "io.txt");

// -> NIO
Path directory = Paths.get("C:/");
Path pathInDirectory = directory.resolve("nio.txt");

Converting File from/to Path for use with libraries

// -> IO to NIO
Path pathFromFile = new File("io.txt").toPath();

// -> NIO to IO
File fileFromPath = Paths.get("nio.txt").toFile();

Check if the file exists and delete it if it does

// -> IO
if (file.exists()) {
    boolean deleted = file.delete();
    if (!deleted) {
        throw new IOException("Unable to delete file");
    }
}

// -> NIO
Files.deleteIfExists(path);

Write to a file via an OutputStream

There are several ways to write and read from a file using NIO for different performance and memory constraints, readability and use cases, such as FileChannel (opens new window), Files.write(Path path, byte\[\] bytes, OpenOption... options) (opens new window)... In this example, only OutputStream is covered, but you are strongly encouraged to learn about memory-mapped files and the various static methods available in java.nio.file.Files.

List<String> lines = Arrays.asList(
        String.valueOf(Calendar.getInstance().getTimeInMillis()),
        "line one",
        "line two");

// -> IO
if (file.exists()) {
    // Note: Not atomic
    throw new IOException("File already exists");
}
try (FileOutputStream outputStream = new FileOutputStream(file)) {
    for (String line : lines) {
        outputStream.write((line + System.lineSeparator()).getBytes(StandardCharsets.UTF_8));
    }
}

// -> NIO
try (OutputStream outputStream = Files.newOutputStream(path, StandardOpenOption.CREATE_NEW)) {
    for (String line : lines) {
        outputStream.write((line + System.lineSeparator()).getBytes(StandardCharsets.UTF_8));
    }
}

Iterating on each file within a folder

// -> IO
for (File selectedFile : folder.listFiles()) {
    // Note: Depending on the number of files in the directory folder.listFiles() may take a long time to return
    System.out.println((selectedFile.isDirectory() ? "d" : "f") + " " + selectedFile.getAbsolutePath());
}

// -> NIO
Files.walkFileTree(directory, EnumSet.noneOf(FileVisitOption.class), 1, new SimpleFileVisitor<Path>() {
    @Override
    public FileVisitResult preVisitDirectory(Path selectedPath, BasicFileAttributes attrs) throws IOException {
        System.out.println("d " + selectedPath.toAbsolutePath());
        return FileVisitResult.CONTINUE;
    }

    @Override
    public FileVisitResult visitFile(Path selectedPath, BasicFileAttributes attrs) throws IOException {
        System.out.println("f " + selectedPath.toAbsolutePath());
        return FileVisitResult.CONTINUE;
    }
});

Recursive folder iteration

// -> IO
recurseFolder(folder);

// -> NIO
// Note: Symbolic links are NOT followed unless explicitly passed as an argument to Files.walkFileTree
Files.walkFileTree(directory, new SimpleFileVisitor<Path>() {
    @Override
    public FileVisitResult preVisitDirectory(Path dir, BasicFileAttributes attrs) throws IOException {
        System.out.println("d " + selectedPath.toAbsolutePath());
        return FileVisitResult.CONTINUE;
    }

    @Override
    public FileVisitResult visitFile(Path selectedPath, BasicFileAttributes attrs) throws IOException {
        System.out.println("f " + selectedPath.toAbsolutePath());
        return FileVisitResult.CONTINUE;
    }
});


private static void recurseFolder(File folder) {
    for (File selectedFile : folder.listFiles()) {
        System.out.println((selectedFile.isDirectory() ? "d" : "f") + " " + selectedFile.getAbsolutePath());
        if (selectedFile.isDirectory()) {
            // Note: Symbolic links are followed
            recurseFolder(selectedFile);
        }
    }
}
  Reading an image from a file 
import java.awt.Image;
import javax.imageio.ImageIO;

...

try {
    Image img = ImageIO.read(new File("~/Desktop/cat.png"));
} catch (IOException e) {
    e.printStackTrace();
}
  File Read/Write Using FileInputStream/FileOutputStream

Write to a file test.txt:

String filepath ="C:\\test.txt";
FileOutputStream fos = null;
try {
      fos = new FileOutputStream(filepath);
      byte[] buffer = "This will be written in test.txt".getBytes();
      fos.write(buffer, 0, buffer.length);
      fos.close();
} catch (FileNotFoundException e) {
      e.printStackTrace();
} catch (IOException e) {
      e.printStackTrace();
} finally{
      if(fos != null)
        fos.close();
}

Read from file test.txt:

String filepath ="C:\\test.txt";        
FileInputStream fis = null;
try {
   fis = new FileInputStream(filepath);
   int length = (int) new File(filepath).length();
   byte[] buffer = new byte[length];
   fis.read(buffer, 0, length);
} catch (FileNotFoundException e) {
     e.printStackTrace();
} catch (IOException e) {
     e.printStackTrace();
} finally{
   if(fis != null)
     fis.close();
}

Note, that since Java 1.7 the try-with-resources (opens new window) statement was introduced what made implementation of reading\writing operation much simpler:

Write to a file test.txt:

String filepath ="C:\\test.txt";
try (FileOutputStream fos = new FileOutputStream(filepath)){
    byte[] buffer = "This will be written in test.txt".getBytes();
    fos.write(buffer, 0, buffer.length);
} catch (FileNotFoundException e) {
    e.printStackTrace();
} catch (IOException e) {
    e.printStackTrace();
}

Read from file test.txt:

String filepath ="C:\\test.txt";
try (FileInputStream fis = new FileInputStream(filepath)){
    int length = (int) new File(filepath).length();
    byte[] buffer = new byte[length];
    fis.read(buffer, 0, length);
} catch (FileNotFoundException e) {
    e.printStackTrace();
} catch (IOException e) {
    e.printStackTrace();
}
  Reading all bytes to a byte[]

Java 7 introduced the very useful Files (opens new window) class

import java.nio.file.Files;
import java.nio.file.Paths;
import java.nio.file.Path;

Path path = Paths.get("path/to/file");

try {
    byte[] data = Files.readAllBytes(path);
} catch(IOException e) {
    e.printStackTrace();
}
  Copying a file using Channel

We can use Channel to copy file content faster. To do so, we can use transferTo() method of FileChannel .

import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.nio.channels.FileChannel;

public class FileCopier {
    
    public static void main(String[] args) {
        File sourceFile = new File("hello.txt");
        File sinkFile = new File("hello2.txt");
        copy(sourceFile, sinkFile);
    }

    public static void copy(File sourceFile, File destFile) {
        if (!sourceFile.exists() || !destFile.exists()) {
            System.out.println("Source or destination file doesn't exist");
            return;
        }


        try (FileChannel srcChannel = new FileInputStream(sourceFile).getChannel();
             FileChannel sinkChanel = new FileOutputStream(destFile).getChannel()) {

            srcChannel.transferTo(0, srcChannel.size(), sinkChanel);
        } catch (IOException e) {
            e.printStackTrace();
        }
    }
}
  Writing a byte[] to a file 
byte[] bytes = { 0x48, 0x65, 0x6c, 0x6c, 0x6f };

try(FileOutputStream stream = new FileOutputStream("Hello world.txt")) {
    stream.write(bytes);
} catch (IOException ioe) {
    // Handle I/O Exception
    ioe.printStackTrace();
}


byte[] bytes = { 0x48, 0x65, 0x6c, 0x6c, 0x6f };

FileOutputStream stream = null;
try {
    stream = new FileOutputStream("Hello world.txt");
    stream.write(bytes);
} catch (IOException ioe) {
    // Handle I/O Exception
    ioe.printStackTrace();
} finally {
    if (stream != null) {
        try {
            stream.close();
        } catch (IOException ignored) {}
    }
}

Most java.io file APIs accept both Strings and Files as arguments, so you could as well use

File file = new File("Hello world.txt");
FileOutputStream stream = new FileOutputStream(file);
  Stream vs Writer/Reader API

Streams provide the most direct access to the binary content, so any InputStream (opens new window) / OutputStream (opens new window) implementations always operate on ints and bytes.

// Read a single byte from the stream
int b = inputStream.read();
if (b >= 0) { // A negative value represents the end of the stream, normal values are in the range 0 - 255
    // Write the byte to another stream
    outputStream.write(b);
}

// Read a chunk
byte[] data = new byte[1024];
int nBytesRead = inputStream.read(data);
if (nBytesRead >= 0) { // A negative value represents end of stream
    // Write the chunk to another stream
    outputStream.write(data, 0, nBytesRead);
}

There are some exceptions, probably most notably the PrintStream (opens new window) which adds the "ability to print representations of various data values conveniently". This allows to use System.out (opens new window) both as a binary InputStream and as a textual output using methods such as System.out.println().

Also, some stream implementations work as an interface to higher-level contents such as Java objects (see Serialization) or native types, e.g. DataOutputStream (opens new window) / DataInputStream (opens new window).

With the Writer (opens new window) and Reader (opens new window) classes, Java also provides an API for explicit character streams. Although most applications will base these implementations on streams, the character stream API does not expose any methods for binary content.

// This example uses the platform's default charset, see below
// for a better implementation.

Writer writer = new OutputStreamWriter(System.out);
writer.write("Hello world!");

Reader reader = new InputStreamReader(System.in);
char singleCharacter = reader.read();

Whenever it is necessary to encode characters into binary data (e.g. when using the InputStreamWriter / OutputStreamWriter classes), you should specify a charset if you do not want to depend on the platform's default charset. When in doubt, use a Unicode-compatible encoding, e.g. UTF-8 which is supported on all Java platforms. Therefore, you should probably stay away from classes like FileWriter and FileReader as those always use the default platform charset. A better way to access files using character streams is this:

Charset myCharset = StandardCharsets.UTF_8;

Writer writer = new OutputStreamWriter( new FileOutputStream("test.txt"), myCharset );
writer.write('Ä');
writer.flush();
writer.close();

Reader reader = new InputStreamReader( new FileInputStream("test.txt"), myCharset );
char someUnicodeCharacter = reader.read();
reader.close();

One of the most commonly used Readers is BufferedReader which provides a method to read whole lines of text from another reader and is presumably the simplest way to read a character stream line by line:

// Read from baseReader, one line at a time
BufferedReader reader = new BufferedReader( baseReader );
String line;
while((line = reader.readLine()) != null) {
  // Remember: System.out is a stream, not a writer!
  System.out.println(line);
}
  Reading a file with a Scanner

Reading a file line by line

public class Main {

    public static void main(String[] args) {
        try {
            Scanner scanner = new Scanner(new File("example.txt"));
            while(scanner.hasNextLine())
            {
                String line = scanner.nextLine();
                //do stuff
            }
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        }
    }
}

word by word

public class Main {

    public static void main(String[] args) {
        try {
            Scanner scanner = new Scanner(new File("example.txt"));
            while(scanner.hasNext())
            {
                String line = scanner.next();
                //do stuff
            }
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        }
    }
}

and you can also change the delimeter by using scanner.useDelimeter() method
  Reading a whole file at once 
File f = new File(path);
String content = new Scanner(f).useDelimiter("\\Z").next();

\Z is the EOF (End of File) Symbol. When set as delimiter the Scanner will read the fill until the EOF Flag is reached.
  Iterating over a directory and filter by file extension 

   public void iterateAndFilter() throws IOException {
        Path dir = Paths.get("C:/foo/bar");
        PathMatcher imageFileMatcher =
            FileSystems.getDefault().getPathMatcher(
                "regex:.*(?i:jpg|jpeg|png|gif|bmp|jpe|jfif)");

        try (DirectoryStream<Path> stream = Files.newDirectoryStream(dir,
                entry -> imageFileMatcher.matches(entry.getFileName()))) {

            for (Path path : stream) {
                System.out.println(path.getFileName());
            }
        }
    }
  Reading from a binary file

You can read an a binary file using this piece of code in all recent versions of Java:

File file = new File("path_to_the_file");
byte[] data = new byte[(int) file.length()];
DataInputStream stream = new DataInputStream(new FileInputStream(file));
stream.readFully(data);
stream.close();

If you are using Java 7 or later, there is a simpler way using the nio API:

Path path = Paths.get("path_to_the_file");
byte [] data = Files.readAllBytes(path);
  Locking

A file can be locked using the FileChannel API that can be acquired from Input Output streams and readers

Example with streams

// Open a file stream FileInputStream ios = new FileInputStream(filename);


   // get underlying channel
    FileChannel channel = ios.getChannel();

    /*
     * try to lock the file. true means whether the lock is shared or not i.e. multiple processes can acquire a
     * shared lock (for reading only) Using false with readable channel only will generate an exception. You should
     * use a writable channel (taken from FileOutputStream) when using false. tryLock will always return immediately
     */
    FileLock lock = channel.tryLock(0, Long.MAX_VALUE, true);

    if (lock == null) {
        System.out.println("Unable to acquire lock");
    } else {
        System.out.println("Lock acquired successfully");
    }

    // you can also use blocking call which will block until a lock is acquired.
    channel.lock();

    // Once you have completed desired operations of file. release the lock
    if (lock != null) {
        lock.release();
    }

    // close the file stream afterwards
    // Example with reader
    RandomAccessFile randomAccessFile = new RandomAccessFile(filename,  "rw");
    FileChannel channel = randomAccessFile.getChannel();
    //repeat the same steps as above but now you can use shared as true or false as the channel is in read write mode
  Copying a file using InputStream and OutputStream

We can directly copy data from a source to a data sink using a loop. In this example, we are reading data from an InputStream and at the same time, writing to an OutputStream. Once we are done reading and writing, we have to close the resource.

public void copy(InputStream source, OutputStream destination) throws IOException {
    try {
        int c;
        while ((c = source.read()) != -1) {
            destination.write(c);
        }
    } finally {
        if (source != null) {
            source.close();
        }
        if (destination != null) {
            destination.close();
        }
    }
}
  Reading a file using Channel and Buffer

Channel uses a Buffer to read/write data. A buffer is a fixed sized container where we can write a block of data at once. Channel is a quite faster than stream-based I/O.

To read data from a file using Channel we need to have the following steps-

  1. We need an instance of FileInputStream. FileInputStreamhas a method named getChannel() which returns a Channel.
  2. Call the getChannel() method of FileInputStream and acquire Channel.
  3. Create a ByteBuffer. ByteBuffer is a fixed size container of bytes.
  4. Channel has a read method and we have to provide a ByteBuffer as an argument to this read method. ByteBuffer has two modes - read-only mood and write-only mood. We can change the mode using flip() method call. Buffer has a position, limit, and capacity. Once a buffer is created with a fixed size, its limit and capacity are the same as the size and the position starts from zero. While a buffer is written with data, its position gradually increases. Changing mode means, changing the position. To read data from the beginning of a buffer, we have to set the position to zero. flip() method change the position
  5. When we call the read method of the Channel, it fills up the buffer using data.
  6. If we need to read the data from the ByteBuffer, we need to flip the buffer to change its mode to write-only to read-only mode and then keep reading data from the buffer.
  7. When there is no longer data to read, the read() method of channel returns 0 or -1.
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;

public class FileChannelRead {
 
public static void main(String[] args) {
  
   File inputFile = new File("hello.txt");
  
   if (!inputFile.exists()) {
    System.out.println("The input file doesn't exit.");
    return;
   }

  try {
   FileInputStream fis = new FileInputStream(inputFile);
   FileChannel fileChannel = fis.getChannel();
   ByteBuffer buffer = ByteBuffer.allocate(1024);

   while (fileChannel.read(buffer) > 0) {
    buffer.flip();
    while (buffer.hasRemaining()) {
     byte b = buffer.get();
     System.out.print((char) b);
    }
    buffer.clear();
   }

   fileChannel.close();
  } catch (IOException e) {
   e.printStackTrace();
  }
 }
}
  Reading a file using BufferedInputStream

Reading file using a BufferedInputStream generally faster than FileInputStream because it maintains an internal buffer to store bytes read from the underlying input stream.

import java.io.BufferedInputStream;
import java.io.FileInputStream;
import java.io.IOException;


public class FileReadingDemo {

    public static void main(String[] args) {
        String source = "hello.txt";
        
        try (BufferedInputStream bis = new BufferedInputStream(new FileInputStream(source))) {
            byte data;
            while ((data = (byte) bis.read()) != -1) {
                System.out.println((char) data);
            }
        } catch (IOException e) {
            e.printStackTrace();
        }

    }
}
  Writing a file using Channel and Buffer

To write data to a file using Channel we need to have the following steps:

  1. First, we need to get an object of FileOutputStream
  2. Acquire FileChannel calling the getChannel() method from the FileOutputStream
  3. Create a ByteBuffer and then fill it with data
  4. Then we have to call the flip() method of the ByteBuffer and pass it as an argument of the write() method of the FileChannel
  5. Once we are done writing, we have to close the resource
import java.io.*;
import java.nio.*;
public class FileChannelWrite {

 public static void main(String[] args) {

  File outputFile = new File("hello.txt");
  String text = "I love Bangladesh.";

  try {
   FileOutputStream fos = new FileOutputStream(outputFile);
   FileChannel fileChannel = fos.getChannel();
   byte[] bytes = text.getBytes();
   ByteBuffer buffer = ByteBuffer.wrap(bytes);
   fileChannel.write(buffer);
   fileChannel.close();
  } catch (java.io.IOException e) {
   e.printStackTrace();
  }
 }
}
  Writing a file using PrintStream

We can use PrintStream class to write a file. It has several methods that let you print any data type values. println() method appends a new line. Once we are done printing, we have to flush the PrintStream.

import java.io.FileNotFoundException;
import java.io.PrintStream;
import java.time.LocalDate;

public class FileWritingDemo {
    public static void main(String[] args) {
        String destination = "file1.txt";

        try(PrintStream ps = new PrintStream(destination)){
            ps.println("Stackoverflow documentation seems fun.");
            ps.println();
            ps.println("I love Java!");
            ps.printf("Today is: %1$tm/%1$td/%1$tY", LocalDate.now());

            ps.flush();
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        }

    }
}
  Iterate over a directory printing subdirectories in it 

 public void iterate(final String dirPath) throws IOException {
    final DirectoryStream<Path> paths = Files.newDirectoryStream(Paths.get(dirPath));
    for (final Path path : paths) {
      if (Files.isDirectory(path)) {
        System.out.println(path.getFileName());
      }
    }
  }
  Adding Directories

To make a new directory from a File instance you would need to use one of two methods: mkdirs() or mkdir().

  • mkdir() - Creates the directory named by this abstract pathname. (source (opens new window))
  • mkdirs() - Creates the directory named by this abstract pathname, including any necessary but nonexistent parent directories. Note that if this operation fails it may have succeeded in creating some of the necessary parent directories. (source (opens new window))

Note: createNewFile() will not create a new directory only a file.

File singleDir = new File("C:/Users/SomeUser/Desktop/A New Folder/");
    
File multiDir = new File("C:/Users/SomeUser/Desktop/A New Folder 2/Another Folder/");

// assume that neither "A New Folder" or "A New Folder 2" exist

singleDir.createNewFile(); // will make a new file called "A New Folder.file"
singleDir.mkdir(); // will make the directory
singleDir.mkdirs(); // will make the directory

multiDir.createNewFile(); // will throw a IOException
multiDir.mkdir(); // will not work
multiDir.mkdirs(); // will make the directory
  Blocking or redirecting standard output / error

Sometimes a poorly designed 3rd-party library will write unwanted diagnostics to System.out or System.err streams. The recommended solutions to this would be to either find a better library or (in the case of open source) fix the problem and contribute a patch to the developers.

If the above solutions are not feasible, then you should consider redirecting the streams.

Redirection on the command line

On a UNIX, Linux or MacOSX system can be done from the shell using > redirection. For example:

$ java -jar app.jar arg1 arg2 > /dev/null 2>&1
$ java -jar app.jar arg1 arg2 > out.log 2> error.log

The first one redirects standard output and standard error to "/dev/null", which throws away anything written to those streams. The second of redirects standard output to "out.log" and standard error to "error.log".

(For more information on redirection, refer to the documentation of the command shell you are using. Similar advice applies to Windows.)

Alternatively, you could implement the redirection in a wrapper script or batch file that launches the Java application.

Redirection within a Java application

It is also possible to redired the streams within a Java application using System.setOut() and System.setErr(). For example, the following snippet redirects standard output and standard error to 2 log files:

System.setOut(new PrintStream(new FileOutputStream(new File("out.log"))));
System.setErr(new PrintStream(new FileOutputStream(new File("err.log"))));

If you want to throw away the output entirely, you can create an output stream that "writes" to an invalid file descriptor. This is functionally equivalent to writing to "/dev/null" on UNIX.

System.setOut(new PrintStream(new FileOutputStream(new FileDescriptor())));
System.setErr(new PrintStream(new FileOutputStream(new FileDescriptor())));

Caution: be careful how you use setOut and setErr:

  1. The redirection will affect the entire JVM.
  2. By doing this, you are taking away the user's ability to redirect the streams from the command line.
  Accessing the contents of a ZIP file

The FileSystem API of Java 7 allows to read and add entries from or to a Zip file using the Java NIO file API in the same way as operating on any other filesystem.

The FileSystem is a resource that should be properly closed after use, therefore the try-with-resources block should be used.

Reading from an existing file

Path pathToZip = Paths.get("path/to/file.zip");
try(FileSystem zipFs = FileSystems.newFileSystem(pathToZip, null)) {
  Path root = zipFs.getPath("/");
  ... //access the content of the zip file same as ordinary files
} catch(IOException ex) {
  ex.printStackTrace();
}

Creating a new file

Map<String, String> env = new HashMap<>();  
env.put("create", "true"); //required for creating a new zip file
env.put("encoding", "UTF-8"); //optional: default is UTF-8
URI uri = URI.create("jar:file:/path/to/file.zip");
try (FileSystem zipfs = FileSystems.newFileSystem(uri, env)) {
  Path newFile = zipFs.getPath("/newFile.txt");
  //writing to file
  Files.write(newFile, "Hello world".getBytes());
} catch(IOException ex) {
  ex.printStackTrace();
}



Read Article
https://develop.horje.com/learn/1434/reference

 

Horje