To find files/directories with a specific name, relative to pwd:

$ find . -name "myFile.txt"
./myFile.txt

To find files/directories with a specific extension, use a wildcard:

$ find . -name "*.txt"
./myFile.txt
./myFile2.txt

To find files/directories matching one of many extensions, use the or flag:

$ find . -name "*.txt" -o -name "*.sh"

To find files/directories which name begin with abc and end with one alpha character following a one digit:

$ find . -name "abc[a-z][0-9]"

To find all files/directories located in a specific directory

$ find /opt

To search for files only (not directories), use -type f:

find /opt -type f

To search for directories only (not regular files), use -type d:

find /opt -type d

Sometimes we will need to run commands against a lot of files. This can be done using xargs.

find . -type d -print | xargs -r chmod 770

The above command will recursively find all directories (-type d) relative to . (which is your current working directory), and execute chmod 770 on them. The -r option specifies to xargs to not run chmod if find did not find any files.

If your files names or directories have a space character in them, this command may choke; a solution is to use the following

find . -type d -print0 | xargs -r -0 chmod 770

In the above example, the -print0 and -0 flags specify that the file names will be separated using a null byte, and allows the use of special characters, like spaces, in the file names. This is a GNU extension, and may not work in other versions of find and xargs.

The preferred way to do this is to skip the xargs command and let find call the subprocess itself:

find . -type d -exec chmod 770 {} \;

Here, the {} is a placeholder indicating that you want to use the file name at that point. find will execute chmod on each file individually.

You can alternatively pass all file names to a single call of chmod, by using

find . -type d -exec chmod 770 {} +

This is also the behaviour of the above xargs snippets. (To call on each file individually, you can use xargs -n1).

A third option is to let bash loop over the list of filenames find outputs:

find . -type d | while read -r d; do chmod 770 "$d"; done

This is syntactically the most clunky, but convenient when you want to run multiple commands on each found file. However, this is unsafe in the face of file names with odd names.

find . -type f | while read -r d; do mv "$d" "${d// /_}"; done

which will replace all spaces in file names with underscores.^{(This example also won't work if there are spaces in leading directory names.)}

The problem with the above is that while read -r expects one entry per line, but file names can contain newlines (and also, read -r will lose any trailing whitespace). You can fix this by turning things around:

find . -type d -exec bash -c 'for f; do mv "$f" "${f// /_}"; done' _ {} +

This way, the -exec receives the file names in a form which is completely correct and portable; the bash -c receives them as a number of arguments, which will be found in $@, correctly quoted etc. (The script will need to handle these names correctly, of course; every variable which contains a file name needs to be in double quotes.)

The mysterious _ is necessary because the first argument to bash -c 'script' is used to populate $0.

On an ext filesystem, each file has a stored Access, Modification, and (Status) Change time associated with it - to view this information you can use stat myFile.txt; using flags within find, we can search for files that were modified within a certain time range.

To find files that have been modified within the last 2 hours:

$ find . -mmin -120

To find files that have not been modified within the last 2 hours:

$ find . -mmin +120

The above example are searching only on the modified time - to search on access times, or changed times, use a, or c accordingly.

$ find . -amin -120
$ find . -cmin +120

General format:

-mmin n : File was modified n minutes ago
-mmin -n : File was modified less than n minutes ago
-mmin +n : File was modified more than n minutes ago

Find files that have been modified within the last 2 days:

find . -mtime -2

Find files that have not been modified within the last 2 days

find . -mtime +2

Use -atime and -ctime for access time and status change time respectively.

General format:

-mtime n : File was modified nx24 hours ago
-mtime -n : File was modified less than nx24 hours ago
-mtime +n : File was modified more than nx24 hours ago

Find files modified in a range of dates, from 2007-06-07 to 2007-06-08:

find . -type f -newermt 2007-06-07 ! -newermt 2007-06-08  

Find files accessed in a range of timestamps (using files as timestamp), from 1 hour ago to 10 minutes ago:

touch -t $(date -d '1 HOUR AGO' +%Y%m%d%H%M.%S) start_date
touch -t $(date -d '10 MINUTE AGO' +%Y%m%d%H%M.%S) end_date
timeout 10 find "$LOCAL_FOLDER" -newerat "start_date" ! -newerat "end_date" -print  

General format:

-newerXY reference : Compares the timestamp of the current file with reference. XY could have one of the following values: at (access time), mt (modification time), ct (change time) and more. reference is the name of a file whe want to compare the timestamp specified (access, modification, change) or a string describing an absolute time.

Find files larger than 15MB:

find -type f -size +15M

Find files less than 12KB:

find -type f -size -12k

Find files exactly of 12KB size:

find -type f -size 12k

Or

find -type f -size 12288c

Or

find -type f -size 24b

Or

find -type f -size 24

General format:

find [options] -size n[cwbkMG]

Find files of n-block size, where +n means more than n-block, -n means less than n-block and n (without any sign) means exactly n-block

Block size:

1. c: bytes
2. w: 2 bytes
3. b: 512 bytes (default)
4. k: 1 KB
5. M: 1 MB
6. G: 1 GB

The -path parameter allows to specify a pattern to match the path of the result. The pattern can match also the name itself.

To find only files containing log anywhere in their path (folder or name):

find . -type f -path '*log*'

To find only files within a folder called log (on any level):

find . -type f -path '*/log/*'

To find only files within a folder called log or data:

find . -type f -path '*/log/*' -o -path '*/data/*'

To find all files except the ones contained in a folder called bin:

find . -type f -not -path '*/bin/*'

To find all file all files except the ones contained in a folder called bin or log files:

find . -type f -not -path '*log' -not -path '*/bin/*'

To find files, use the -type f flag

$ find . -type f

To find directories, use the -type d flag

$ find . -type d

To find block devices, use the -type b flag

$ find /dev -type b

To find symlinks, use the -type l flag

$ find . -type l

To find all the files of a certain extension within the current path you can use the following find syntax. It works by making use of bash's built-in glob (opens new window) construct to match all the names having the .extension.

find /directory/to/search -maxdepth 1 -type f -name "*.extension"

To find all files of type .txt from the current directory alone, do

find . -maxdepth 1 -type f -name "*.txt"

Syntax

• find [-H] [-L] [-P] [-D debugopts] [-Olevel] [path...] [expression]