There are different modes you can open a file with, specified by the mode parameter. These include:

 with open(filename, 'r') as f:
     f.read()
 with open(filename, 'w') as f:
     f.write(filedata)
 with open(filename, 'a') as f:
     f.write('\n' + newdata)

Python 3 added a new mode for exclusive creation so that you will not accidentally truncate or overwrite and existing file.

• 'x' - open for exclusive creation, will raise FileExistsError if the file already exists
• 'xb' - open for exclusive creation writing mode in binary. The same as x except the data is in binary.
• 'x+' - reading and writing mode. Similar to w+ as it will create a new file if the file does not exist. Otherwise, will raise FileExistsError.
• 'xb+' - writing and reading mode. The exact same as x+ but the data is binary

Allow one to write your file open code in a more pythonic manner:

try:
    with open("fname", "r") as fout:
        # Work with your open file
except FileExistsError:
    # Your error handling goes here

In Python 2 you would have done something like

import os.path
if os.path.isfile(fname):
    with open("fname", "w") as fout:
        # Work with your open file
else:
    # Your error handling goes here

The simplest way to iterate over a file line-by-line:

with open('myfile.txt', 'r') as fp:
    for line in fp:
        print(line)

readline() allows for more granular control over line-by-line iteration. The example below is equivalent to the one above:

with open('myfile.txt', 'r') as fp:
    while True:
        cur_line = fp.readline()
        # If the result is an empty string
        if cur_line == '':
            # We have reached the end of the file
            break
        print(cur_line)

Using the for loop iterator and readline() together is considered bad practice.

More commonly, the readlines() method is used to store an iterable collection of the file's lines:

with open("myfile.txt", "r") as fp:
    lines = fp.readlines()
for i in range(len(lines)):
    print("Line " + str(i) + ": " + line)

This would print the following:

Line 0: hello Line 1: world

To iterate all files, including in sub directories, use os.walk:

import os
for root, folders, files in os.walk(root_dir):
    for filename in files:
        print root, filename

root_dir can be "." to start from current directory, or any other path to start from.

If you also wish to get information about the file, you may use the more efficient method os.scandir (opens new window) like so:

for entry in os.scandir(path):
   if not entry.name.startswith('.') and entry.is_file():
       print(entry.name)

The preferred method of file i/o is to use the with keyword. This will ensure the file handle is closed once the reading or writing has been completed.

with open('myfile.txt') as in_file:
    content = in_file.read()

print(content)

or, to handle closing the file manually, you can forgo with and simply call close yourself:

in_file = open('myfile.txt', 'r')
content = in_file.read()
print(content)
in_file.close()

Keep in mind that without using a with statement, you might accidentally keep the file open in case an unexpected exception arises like so:

in_file = open('myfile.txt', 'r')
raise Exception("oops")
in_file.close()  # This will never be called

with open('myfile.txt', 'w') as f:
    f.write("Line 1")
    f.write("Line 2")
    f.write("Line 3")
    f.write("Line 4")

If you open myfile.txt, you will see that its contents are:

Line 1Line 2Line 3Line 4

Python doesn't automatically add line breaks, you need to do that manually:

with open('myfile.txt', 'w') as f:
    f.write("Line 1\n")
    f.write("Line 2\n")
    f.write("Line 3\n")
    f.write("Line 4\n")

Line 1
Line 2
Line 3
Line 4

Do not use os.linesep as a line terminator when writing files opened in text mode (the default); use \n instead.

If you want to specify an encoding, you simply add the encoding parameter to the open function:

with open('my_file.txt', 'w', encoding='utf-8') as f:
    f.write('utf-8 text')

It is also possible to use the print statement to write to a file. The mechanics are different in Python 2 vs Python 3, but the concept is the same in that you can take the output that would have gone to the screen and send it to a file instead.

with open('fred.txt', 'w') as outfile:
    s = "I'm Not Dead Yet!"
    print(s) # writes to stdout
    print(s, file = outfile) # writes to outfile

    #Note: it is possible to specify the file parameter AND write to the screen
    #by making sure file ends up with a None value either directly or via a variable
    myfile = None
    print(s, file = myfile) # writes to stdout
    print(s, file = None)   # writes to stdout

In Python 2 you would have done something like

outfile = open('fred.txt', 'w')
s = "I'm Not Dead Yet!"
print s   # writes to stdout
print >> outfile, s   # writes to outfile

Unlike using the write function, the print function does automatically add line breaks.

Employ the EAFP (opens new window) coding style and try to open it.

import errno

try:
    with open(path) as f:
        # File exists
except IOError as e:
    # Raise the exception if it is not ENOENT (No such file or directory)
    if e.errno != errno.ENOENT:
        raise
    # No such file or directory

This will also avoid race-conditions if another process deleted the file between the check and when it is used. This race condition could happen in the following cases:

import os
os.path.isfile('/path/to/some/file.txt')

import pathlib
path = pathlib.Path('/path/to/some/file.txt')
if path.is_file():
    ...

To check whether a given path exists or not, you can follow the above EAFP procedure, or explicitly check the path:

import os
path = "/home/myFiles/directory1"

if os.path.exists(path):
    ## Do stuff

Using the mmap (opens new window) module allows the user to randomly access locations in a file by mapping the file into memory. This is an alternative to using normal file operations.

import mmap

with open('filename.ext', 'r') as fd:
    # 0: map the whole file
    mm = mmap.mmap(fd.fileno(), 0)

    # print characters at indices 5 through 10
    print mm[5:10]

    # print the line starting from mm's current position
    print mm.readline()

    # write a character to the 5th index
    mm[5] = 'a'

    # return mm's position to the beginning of the file
    mm.seek(0)

    # close the mmap object
    mm.close()

with open(input_file, 'r') as in_file, open(output_file, 'w') as out_file:
    for line in in_file:
        out_file.write(line)

• Using the shutil module:

import shutil
shutil.copyfile(src, dst)

import shutil
source='//192.168.1.2/Daily Reports'
destination='D:\\Reports\\Today'
shutil.copytree(source, destination)  

The destination directory must not exist already.

So let's suppose you want to iterate only between some specific lines of a file

You can make use of itertools for that

This will read through the lines 13 to 20 as in python indexing starts from 0. So line number 1 is indexed as 0

As can also read some extra lines by making use of the next() keyword here.

And when you are using the file object as an iterable, please don't use the readline() statement here as the two techniques of traversing a file are not to be mixed together

>>> import os
>>> os.stat(path_to_file).st_size == 0

or

>>> import os    
>>> os.path.getsize(path_to_file) > 0

However, both will throw an exception if the file does not exist. To avoid having to catch such an error, do this:

import os
def is_empty_file(fpath):  
    return os.path.isfile(fpath) and os.path.getsize(fpath) > 0

which will return a bool value.

Syntax

• file_object = open(filename [, access_mode][, buffering])

Parameters

Remarks

Avoiding the cross-platform Encoding Hell

When using Python's built-in open(), it is best-practice to always pass the encoding argument, if you intend your code to be run cross-platform. The Reason for this, is that a system's default encoding differs from platform to platform.

While linux systems do indeed use utf-8 as default, this is not necessarily true for MAC and Windows.

To check a system's default encoding, try this:

import sys
sys.getdefaultencoding()

from any python interpreter.

Hence, it is wise to always sepcify an encoding, to make sure the strings you're working with are encoded as what you think they are, ensuring cross-platform compatiblity.

with open('somefile.txt', 'r', encoding='UTF-8') as f:
    for line in f:
        print(line)